The beer produced by a brewery which was just put into production in Shaanxi was always a little turbid due to lack of experience. Later, it was forced to sell only the beer in the supernatant, but this seriously wasted the remaining alcohol in the fermented liquid. Later, we learned from other companies that after distillation and debugging, we needed to add fine filtering equipment to remove the residue in the fermented liquid, after comparison, we found beibang environmental protection in Henan to do this project. Researchers in beibang Laboratory found that the solid content in the fermented liquid was about 8%, and the thallus size in the fermented liquid was about 0.4 μm, moreover, the filter cake with thallus is relatively sticky, and it is difficult to peel off naturally from the filter cloth of the filter press by gravity. Considering these factors, the researchers finally recommended a set of diaphragm filter press with automatic bending system, which could make the filter press change the inclination angle of the filter cloth when working with the filter cloth bending system, it forms an inverted V-shape, and at the same time, the spring on the filter cloth stretches back and forth to produce vibration, which makes the filter cake take off automatically. However, for the filtering of adhesive materials and users who have higher requirements on moisture content, this machine has its own unique characteristics. The filter plate is molded by reinforced polypropylene, and the membrane and polypropylene plate are inlaid together. It is firm, hard to fall off and has a long service life.
Later, after three months of trial operation, the person in charge of the winery found that in the past three months, the beer productivity had been significantly improved, the turbidity phenomenon had never happened again, and the sales volume had been significantly improved.
Bei bang production diaphragm filter press stand-alone processing power is very prominent, every year optical yuan liao fei for we save table $100,000, other accessories long use period, wear rate low, low maintenace, convenient maintenance, it saves the shutdown time and effectively reduces the production cost.